| Customization: | Available |
|---|---|
| Type: | Signal Repeater |
| Transmission Medium: | Donor Antenna |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The RF Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in single system. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It receives the low-power signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
| Items | Specifications | |
| System | TETRA400 | |
| Working Frequency(Customized) | 380~385Mhz / 390~395MHz | |
| Bandwidth | 5MHz max. | |
| Maximum Gain | 85±3dB | |
| Maximum Output Power | Uplink | +33dBm (5MHz BW) |
| Downlink | +37dBm (5MHz BW) | |
| ALC | Support | |
| Gain Adjustment Range | 0-31dB in step of 1dB | |
| Voltage Standing Wave Ratio | ≤ 1.5 | |
| Maximum Input power(Non-destructive) | 0dBm | |
| Noise Figure | ≤ 8dB | |
| System Delay | ≤6μSec | |
| I/O Impedance | 50Ω | |
| RF Connector | N-Type (Female) | |
| Temperature Range | Operation: 0°C ~ + 55°C | |
| Relative Humidity Range | ≤ 95% (non condensing) | |
| Power Supply (customized) | AC110V/220V,50/60Hz | |
| Power consumption | ≤120W | |
| Casing Level | IP65 | |
| Dimensions | 447*357*171mm | |
| Weight | ≤15kg | |
| Control Connector | USB port for local / remote | |
| Special Requirements | Dry contact internal Alarm Relay max.0,5A 50V if DL Output is below 20dBm Relay shall open if DL Ouput is higer then 20dBm the Relay shall be closed. There shall be a XLR 3 Pole male Connector to Connect external 24V 7Ah Battery for Backup during a Mains failure. Please make sure the battery is charged in normal use (10 Ohm Resistor over the Diode for Charging) |
|
| RoHS compliance | Yes | |
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, ....
Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots, ....
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models with charges.
Q2. Do you accept OEM / ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q3. Delivery & Shipment Date:
It is expected 25-30 working days after the fund/deposit received.
Q4. How can i get the price?
We usually response within 24 hours after we get your inquiry(Except weekend and holidays). If any urgent situation, please contact us by WhatsApp or E-mail.
){kind=link}